# 1MC 90 DEGREE RIGHT ANGLE Rotary Hand Tool

The #1MC is one of our best right angle rotary hand tools, and a must for porting 2 stroke engines.

This hand piece has 5 bearings 2-roller and 3-ball bearings. The #1MC will work great in 100 cc engines and larger, a very sturdy hand piece. The head spindle is mounted in a roller bearing and in a ball bearing at the back. The spindle has a ball bearing at either end. This hand piece can be telescopically extended adding 3" to the length of the hand piece.
The #1MC comes standard with an 1/8" collet, 3 mm and 3/32" also available, sold separately.The two spanner wrenches for tightening your bit into the collet comes with the hand piece. Lubrication required.

1MC can have carbides reversed (inserted into back of rotary head) to run left hand (lh) cut carbide for reverse or contra angles.

DIMENSIONS: OA Length 7 3/4" - Extends to 10 7/8" - From Top of the head to collet end 1 3/8"

Additional and optional collets 1MC Collets

1MC RIGHT ANGLE HAND PIECE MANUFACTURED IN HOUSE FOR CC SPECIALTY, THERE ARE SOME "LOOK-ALIKE" PRODUCTS OUT THERE, BUT NO OTHER TOOL IS SET UP AS WELL FOR 2 STROKE PORTING!

EXCELLENT FOR 2 STROKE TRANSFER PORTS ON YOUR MOTORCYCLE, QUAD FOUR WHEELER, SNOWMOBILE, KART, AND SCOOTER ENGINES !!

STRONG ENOUGH TO CUT THROUGH STEEL, cast iron, and Nikasil CYLINDER LINERS!

The 1MC is a Right angle hand tool that is, in most Porting Professional's opinion, far superior to Dremels, air grinders or other pneumatic devices for porting those hard to reach transfer ports, or other areas that "straight" tools just cant get to.

--- Our customers may find "look-alike" similar products out there from Germany and Imported from Germany that claim to be made for porting and polishing. These products are NOT the same! Only the 1MC that we manufacture here at our CNC shop is designed and setup properly for the demands of porting 2 stroke cylinders. There are many tools that "can" be used for porting, but ours are made for porting. Most other products will only cost more, and perform less.

TRANSFER PORTS TOOL, VERSATILE, STURDY, ALL METAL CONSTRUCTION, Extendable head

PROFESSIONAL GRADE EQUIPMENT WORLD-RENOWNED PORTING TOOL

Please note colors are based on available stock

For more shipping, payment, or ordering options simply email this product to [email protected] . We also accept Visa and MasterCard!

2C and 2T cylinder porting tool

• DIMENSIONS: OA Length 7 3/4" - Extends to 10 7/8" - From Top of the head to collet end 1 3/8"
  
  Telescopically extending head.
  
  Burr can be inserted through back of head to be used with left hand cut burrs.

Please note color of tool is based solely on available stock. Red, gold, silver, and gunmetal gray variations all perform exactly the same.
Please note the 1MC is to never be operated with the head closer than 1 inch to the knurled nut. Operating the 1MC with the inner sliding shaft too far into the body of the tool will cause binding and and can offset the inner hex shaft. If shorter head length is required please see the 182AMC , 266AMC, or the 200AMC.